Continued working on the transom. All parts are cut and checked. Just need the weather to get up above 50 again so that the glue will work.

Reinstalled the exhaust riser and worked out the exhaust connection. Photos coming once everything is installed.

Scraped the remaining carpet pieces off of the right side of the cockpit area.

Transom Installation and Photos

Well the first round of parts for the new transom went in today. All parts fit as expected. The Gorilla Glue seems to have worked as advertised. The photos show the initial round of parts installed. Also included a photo of the new control console.

12-7-2008 Transom Goes Back In

Well I got all the wood pieces for the transom back up in the boat. All the parts fit and the long piece across the stern I thought would give me fits but it slid right in with no problem. Picked up some stainless screws to put it all back together with. I am going to use a polyurethane based glue to put it all together with. Figure because it is going to be screwed through out that the polyurethane should work good.

Photos coming soon.